Get the best Credit Tips at Credit Visionary
Popcorn ceiling is the bumpy-looking ceiling treatment house builders utilized from the 1950s to the 1980s to improve acoustics and mask ceiling defects. Likewise known as ‘home cheese ceiling’ and ‘stucco ceiling,’ the popcorn finish began falling out of favor in the late 1980s and early 1990s because some solutions included asbestos.
Disdain for popcorn ceiling gained momentum in the 2000s when residents started to acknowledge these ceilings are ugly, outdated, and have the tendency to attract dust and crud. Numerous residents who live in older properties are now hiring service providers to get rid of the dull structure from their houses.
If you are tired of your ceiling looking like cottage cheese, it might be time to scrape off the popcorn structure. The good news is, you do not have to work with a costly service provider for the project.
The Perks of Do It Yourself Popcorn Ceiling Removal
Popcorn ceiling removal is messy and time-consuming, so it is not for the faint of heart. It involves scraping away existing texture, re-texturing the ceiling, and then painting the finished product. However as long as you are willing to put forth the effort, this messy task is not very challenging or technical.
The main incentive of DIY removal is the significant monetary benefit. According to Homewyse, you can anticipate to pay a professional $0.71 to $1.25 per square foot for popcorn ceiling removal and re-texturing. For a 1,500-square-foot home, that totals up to approximately $1,500, with the expenses enhancing substantially for larger houses. On the other hand, you can do it yourself for no more than a couple hundred dollars – perfect for a homeowner on a spending plan.
Removing popcorn ceiling likewise pays off when you attempt to offer your home. While a popcorn-less ceiling couldn’t increase the value of your home, it vastly enhance its marketability. A marketable house has the tendency to preserve even more interest, sell much faster, and collect more of its initial asking rate than houses without desirable updates.
Before you start scraping and re-texturing, head to your local hardware store and buy the following items. The included rate quote is based upon mid-range items from a nationwide hardware store:
- Plastic Drop Cloths. When you begin scraping the ceiling, pieces of structure and grit’ll certainly fall onto the floor and furnishings. Buy multiple plastic ground cloth you can utilize to safeguard your furnishings and flooring. You can constantly replace old sheets, but just if you are willing to organize them away post-use. If you make use of a sheet or ground cloth that is not water-proof, be additional cautious when it comes time to spray the ceiling. Estimated cost: $10 for a pack of six.
- Painter’s Tape. Use this to secure drop cloths. Estimated cost: $3 per roll.
- Ladder. Depending upon the height of your ceilings, you might require a small stepladder to reach the popcorn. Estimated cost: $50.
- Protective Gear. Expect structure to fall on you. Secure yourself with safety glasses, a face mask, and rubber gloves. Estimated cost: Less than $10 for all three.
- Pump Sprayer. Before you start scraping, make use of a pump sprayer, which moistens and loosens the texture. Estimated cost: Less than $20.
- Ceiling Texture Scraper. Select a model that assists catch some of the falling structure to minimize mess. Estimated cost: $20.
- Drywall Substance (Joint Compound). Expect to fix parts of the ceiling after removing the texture with drywall compound. Also, make use of the compound to develop the ceiling’s finish – either smooth or textured. Estimated cost: $8 for one gallon, which covers about 100 square feet.
- Sanding Sponge. If you use drywall substance for repairs, a sanding sponge assists level out the substance. Estimated cost: $2 apiece.
- Putty Knife and Utility Knife. The putty knife is for using the substance, and the utility knife is for tidying up dried, rough edges. Estimated cost: $15 for both.
- Large Trowel for a Smooth Finish. If you want your ceilings to have a smooth finish, utilize a big trowel to apply the drywall substance once the texture is removed. Estimated cost: $5.
- Texture Sprayer for a Textured Finish. If you want your ceilings to have a textured finish, but don’t want to do the texture by hand, utilize a structure sprayer. Avoid the acquisition rate by renting one for a day. Estimated cost: $50 for a one-day rental.
- White Ceiling Paint. To finish the job, repaint the ceiling to supply a safety seal. One gallon of ceiling paint covers up to 300 square feet. Estimated cost: $25 per gallon.
- Paintbrushes. If you are repainting your ceiling by hand, purchase paint rollers and paintbrushes to finish the task. Estimated cost: $15 for a plan of necessary offers.
- Paint Sprayer (Optional). If you are doing more than one room, consider renting a paint sprayer rather of making use of brushes or rollers. A paint sprayer can speed the painting procedure considerably. Estimated cost: $25 to rent for the day.
How to Remove Popcorn Texture
1. Protect the Space
Take the time to do the prep work required to adequately shield your space. This makes a big distinction when it comes time to clean up at the end of the project, and it also limits your exposure to harmful chemicals.
- Test Your Ceiling for Asbestos. This is the most important action of your task. If your structure was applied before 1979, have it tested for asbestos before you do anything else. You can discover an asbestos inspector by visiting the Environmental Protection Agency internet site for a listing of your state’s inspectors. If your ceiling has asbestos in it, scrap your Do It Yourself strategies and hire a professional to effectively handle the asbestos.
- Remove Items From the Space. Move your furnishings out of the space for the most convenient tidy up.
- Position Drop Cloths. Location drop cloths throughout every portion of the floor, taping them to the base molding to avoid gaps. If you are only doing one space, think about taping a ground cloth to the door to avoid dust from escaping (if you do this, make certain you open a window).
2. Moisten the Texture
Moisten the popcorn structure to reduce dust and loosen it from the drywall. Some people simply make use of a spray bottle to mist the ceiling, but a pump sprayer makes the process a little much easier.
- Fill the Sprayer. You do not need any special formula. Water works simply great.
- Moisten 5 Square Feet at a Time. Lightly spray a little, 5 foot square prior to scraping. Don’t utilize too much water, as that can damage the underlying drywall. If the structure does not remove quickly, spray a bit even more water on the structure.
- Wait 10 Minutes. Allow the texture to take in wetness for about 10 minutes prior to scraping.
3. Scrape off the Texture
When the water soaks in sufficiently, the texture should fall right off the ceiling with a fast scrape.
- Put on Protective Gear. Put on your gloves, face mask, and safety glasses prior to scraping.
- Scrape in a Small Square. Begin scraping in the area you moistened. Use your ceiling scraper for convenience.
- Use Your Putty and Energy Knives. For structure in the corners and by the molding, scrape with a putty knife. For extra stubborn locations, attempt making use of an utility knife for removal.
- Complete the Room. Continue moistening small areas, permitting the water to soak in, then scraping the texture up until everything’s gotten rid of.
- Wipe Down the Ceiling. Use a wet paper towel to clean down the ceiling. This removes any staying dust residue.
How to Refinish Your Ceiling
Unfortunately, you are not quite done with the job. When you’ve actually completed removing the popcorn texture and cleaning down the drywall, wait 1 Day before refinishing the ceiling. The 24-hour delay period enables the ceiling to dry.
1. Repair Drywall, If Needed
Sometimes scraping away ceiling texture leaves the underlying drywall damaged.
- Use Your Putty Knife to Fill Blemishes With Drywall Compound. Envision you are frosting a cake – with firm, steady strokes, fill blemishes to leave a smooth finish. Securely glide the drywall substance throughout the surface, making it as smooth as possible to prevent the demand for additional sanding.
- Wait a minimum of Four Hours Prior to Sanding. As soon as the holes are filled, wait for the compound to dry prior to sanding rough edges with your sanding sponge. Put on a face mask and safety glasses prior to sanding.
2. Apply Drywall Compound
Now that the popcorn texture is removed and the ceiling is repaired, you need to apply a brand-new structure to safeguard the drywall.
- Consider Protecting Your Walls. If you did not curtain your walls with ground cloth, consider protecting them now by taping drop cloths along the molding. This is specifically vital if you are using a texture sprayer.
- Wear Protective Gear. Although you don’t have to use your gloves, deal with mask, and goggles, consider preparing to protect yourself from falling substance or from establishing blisters on your hands.
- Option 1: Apply a Thin Compound Layer for a Smooth Finish. Working in little squares, utilize your trowel to scrape a thin layer of drywall compound across the ceiling. You can pursue a totally smooth finish, or opt for an elegant semi-smooth texture. If you opt for a semi-smooth texture, use a rented structure sprayer for the right look. The structure sprayer allows you to skip the action with the trowel.
- Option 2: Utilize a Structure Sprayer for a Semi-Smooth Finish. If you ‘d prefer a semi-smooth structure (like an orange peel), lease a texture sprayer to get the right appearance. Protect your walls with taped-up drop cloths, then load the structure sprayer’s gun hopper with joint substance and link the spray gun to the air compressor. Adjust the pressure of the air compressor to the specifications in the handbook, then spray the ceiling from a distance of roughly three or four feet. Spray in a smooth as well as pattern, just like exactly what you’d do with a can of spray paint. Examine your work regularly to ensure you are not missing out on any spots.
- Work Meticulously Throughout the Ceiling. It could take a while to get the hang of it, however you’ll quickly find out the best ways to use the trowel or texture sprayer efficiently. Keep moving in small areas up until the whole ceiling has a thin layer of drywall substance.
3. Paint the Ceiling
Allow the new drywall compound to set for a minimum of 1 Day, then use white ceiling paint to offer your ceiling a clean, crisp finish.
- Protect Your Walls and Floors. Even if you have handled to stay clear of using drop cloths to this point, protect your room from paint drips by using them now. If your drop cloths are already in location, double-check to make certain there are no spaces or tears.
- Use a Sprayer or Brush to Use Ceiling Paint. Tons your paint sprayer with white paint, or pour the paint into a pan for hand application. Spray or roll the paint methodically in little areas. The rollers and brushes may save you a couple bucks, but consider leasing a paint sprayer if you are covering a large area. The paint sprayer saves you time and the physical discomfort of attempting to paint above your head.
If you are interested in beautifying your house and increasing its value with simple Do It Yourself tasks, popcorn ceiling removal is simply one place to start. Other inexpensive jobs that offer a fast property face-lift include repainting your walls, refinishing your cabinets, or changing outdated lights.
Besides the cost-savings involved, you could discover that putting in the hard work actually increases your enjoyment of your house. If you are on the fence about renovating or transferring, a basic DIY project can help you see your present home with brand-new eyes.
Have you tried eliminating popcorn ceiling? What extra pointers can you provide?