Get the best Credit Tips at Credit Visionary

Whether you are in the marketplace to offer your house or merely to beautify it, don’t undervalue the value of an upgraded kitchen area. The qualities most likely to stand out of prospective buyers include matching home appliances, beautiful counter tops, fresh paint, and, most significantly, upgraded cabinetry. Outdated, dull, or uninspired cabinets can make any kitchen look stale and unfinished, however beautifully completed cabinets can make all the distinction worldwide to its total appearance.

Renovation is never ever simple, but luckily there are a number of choices available to assist you along the means. Refinishing, changing, or refacing your cabinets each stand for different rate points and require various levels of exertion, but all them can bring a drab, sleepy kitchen back to life.

Cabinet Replacement

Cabinetry replacement is the most pricey alternative, and though normally it isn’t needed, there are numerous situations in which you could need to consider it:

  • Broken Cabinet Boxes. Sometimes kitchen cabinets is just too old or too harmed to require any sort of salvaging. If your kitchen cabinet boxes are broken, fractured, or breaking down, it’s time to replace them.
  • Worn-Down Cabinetry. Even if your cabinets are not broken, worn-down pieces may have to be replaced. The kitchen cabinetry that’s most likely to merely use down gradually are stock pieces made from low-quality plywood. It does not make good sense to pour much cash into anything besides changing these pieces, specifically when they begin to reveal their age – cracked woodwork, broken frames, warping, or water damages are signs that it’s time for a brand-new set.
  • Poor Kitchen Layout. Sadly, homebuilders don’t constantly make the best design selections. If your kitchen area’s layout does not make sense for the method you wish to make use of the area, you might’ve to remove all the cabinetry and change it with a different layout.

A cabinet replacement task can set you back anywhere between $5,000 and $30,000, depending upon the quality and customization of the pieces you pick. The results are frequently stunning, but this is one renovating job that’s untidy, costly, and lengthy.

Cabinet Refacing

Refacing your kitchen cabinetry can deliver the same ‘wow’ factor as replacement, and for simply a portion of the expense. When refacing, you keep the cabinet boxes in place, but replace the doors, drawers, and dealing with in an upgraded style.

Consider handling a refacing task if your kitchen area has any of the following features:

  • High-Quality Cabinetry. If your cabinet boxes are in good condition, you don’t have to replace them. Simply exchange out the doors and keep the kitchen cabinetry in location.
  • Good Kitchen Layout. Refacing is a good choice if you are pleased with the design of your kitchen and want to make just cosmetic changes.
  • Outdated Style. Consider doing a refacing job rather than a refinishing project if the doors and drawers are hopelessly out of date. In some cases, even a great coat of paint or stain can’t change the look of a cabinet with a 1980s’ style, so you may want to think about refacing as opposed to just refinishing.

When it comes to cost, cabinet refacing is a mid-range task. Changing the doors and drawers typically costs between $2,500 and $15,000 for the whole project, which is less pricey than an overall replacement, however still quite a bit more costly than cabinet refinishing.


Cabinet Refinishing

Refinishing your cabinets is the simplest and least costly option, and can work marvels for the appearance of the majority of kitchen areas. Like refacing, it’s a solid choice if your cabinets are in good shape and you are delighted with the design of your kitchen area.

Consider refinishing if you’ve any of the following:

  • Reasonably Stylish Cabinets. A refinishing job won’t magically change an unappealing style, so make sure you feel comfy with the overall appearance of the woodwork prior to beginning your job.
  • Chipped or Dirty Finishing. Cabinets can end up being unclean or faded in time. A refinishing job can make them look brand-new once more.
  • Unattractive Colors. If your previous residents thought that forest green cabinets were an excellent concept, a refinishing task can care for an outdated color design.

Refinishing your kitchen cabinetry is most likely to cost you less than $300 for the whole task, so it’s an excellent choice as long as you don’t mind getting your hands grimy. Reserve a weekend for the project and you can enjoy an upgraded kitchen area in no time. If you feel comfortable with your present design, the quality of the cabinets, and the style of the woodwork, do not be reluctant to dive into your refinishing task.

Safety Concerns

Cabinet refinishing is a safe project, as far as house updates go. However, you’re going to be exposed to harsh cleaners, primers, and paint, which can overwhelm you with fumes if you are not careful.

Start your job on a day when you can keep your windows open and run fans for sufficient ventilation. Pause if you feel light-headed, and do not return to the job up until you are able to enhance air flow. You can further minimize your threat of exposure to harmful chemicals by using a face mask and rubber gloves while working with the supplies.

Supply List

You can finish your project with a refinishing system like Rustoleum Cabinet Transformations, or you can do it yourself with the following supplies. These expense quotes are for mid-range items at a national hardware chain:

  • Drill. You require an electricity drill to get rid of cabinet doors and change the hardware. High-end models can be pricey, however there are serviceable drills out there available for much less. If you do not mean to utilize your drill often after this job is finished, opt for the more cost-friendly alternative. If you really wish to cut costs and you’ve actually got some significant strength and endurance, you may have the ability to accomplish these tasks with a screwdriver. Estimated cost: $25 to $100 for an electric drill, or $10 for a screwdriver with multiple bits.
  • Rubber Gloves. To shield your hands, use rubber gloves when stripping the cabinets’ old finish. Estimated cost: $2.
  • Trisodium Phosphate Mixture. Kitchen cabinets should be deep-cleaned prior to refinishing in order to eliminate years of built-up kitchen area gunk. Trisodium phosphate gets the job done. Estimated cost: $10 per can.
  • Paint and Varnish Stripping Gel. You need to eliminate the cabinets’ previous finish with a stripping gel. Estimated cost: $25 for a gallon.
  • Putty Knife. Use this knife to scrape off the old finish from the cabinets. Estimated cost: Less than $5.
  • Sponge. Clean the cabinets with a sponge before and after the trisodium phosphate and stripping actions. Estimated cost: $2.
  • 100-Grit and 220-Grit Sandpaper. As soon as you are done cleaning and stripping the cabinets, they need to be sanded. Acquisition both sorts of sandpaper for various steps. Estimated cost: Less than $10 total amount for a package of each.
  • Sawhorses (Optional). While not essential, sawhorses can make your task a lot easier. Set them up in the backyard so you can paint or stain the cabinets off the ground. Estimated cost: $25 for a pair.
  • Drop Cloths. Whether you are doing your refinishing inside or outside, utilize plastic ground cloth to aid with quick cleanup. Estimated cost: Less than $5 for a package.
  • Paint Pan, Brushes, and Rollers. You wish to work effectively once it’s time to repaint or re-stain your cabinets, so make sure you’ve a mix of both rollers and brushes, as well as a paint pan, on hand. Estimated cost: $15 total.
  • Primer, Paint, and Stain. If you are painting your cabinets, buy a one-gallon combination primer and sealer, in addition to a gallon of your desired paint color. If you are staining your cabinets, purchase one gallon of indoor stain and sealer in a color of your choice. Estimated cost: $20 for one gallon of primer and sealer, $25 for a gallon of paint, and $30 for a gallon of indoor stain and sealer.
  • New Drawer Pulls and Hinges (Optional). Lots of homeowners take the chance to change their drawer pulls and hinges when refinishing cabinets. If you wish to alter out your hardware, acquisition matching drawer pulls and matching hinges. Estimated cost: $2 to $8 apiece for matching drawer pulls, $1 apiece for matching hinges, $50 for a bundle of 25 drawer pulls, and $20 for a bundle of 20 hinges.
  • Drawer Pull Jig (Optional). If you decide to replace your drawer pulls, purchase a jig as a design template for drilling. Estimated cost: $8.
  • Tape Measure (Optional). You require a measuring tape to drill for the drawer pulls, if you choose to update your hardware. Estimated cost: $5 to $10.
  • Vacuum Cleaner. The task of refinishing cabinets is messy, and a vacuum can help you easily clean up sawdust and gunk. Estimated cost: $200 for a mid-range vacuum cleaner.

Even if you choose to change all your drawer pulls, you can still finish the cabinet refinishing with all the above-mentioned materials for less than $300, leaving out the vacuum.


Step-By-Step Guide to Refinishing Cabinets

Even though you will not invest your entire weekend working hands-on, ensure you set aside a couple of complete days to account for drying out time in between actions.

  1. Prepare Your Kitchen. Empty all your cabinet boxes and drawers. Eliminate appliances from counter tops. Place ground cloth on the floor underneath your cabinet boxes, and use painter’s tape to protect the walls that meet them. Open windows to ensure the kitchen area is well ventilated.
  2. Prepare a Staging Area. Produce a staging area to complete the bulk of your work. If possible, utilize an outdoor area, which can help with ventilation and drying out times. Place ground cloth on the floor or ground to shield your staging location from chemicals and paint, in addition to any footpaths connecting it to the workplace. If you’ve sawhorses, set them up over the drop cloths so you can work on your cabinet doors and drawers off the ground.
  3. Remove Hardware, Doors, and Drawers. Use your drill to eliminate the screws and take down all existing drawer pulls and hinges. Next, get rid of the cabinet doors from their boxes. Move the drawers out according to their design and take them, along with the doors, to your staging location for cleaning and painting.
  4. Strip and Sand Cabinetry. Use your paint and stain stripper to get rid of the old finish from the doors, drawers, and cabinet facing. Follow the directions on the stripper you purchase, because they differ by product. Usually, however, you should use the stripping solution, allow it to dry, then scrape it off, in addition to the finish, with a putty knife. As soon as the finish is gotten rid of, sand the surfaces consistently with 100-grit sandpaper to get rid of any excess finish.
  5. Clean Cabinetry. Mix a half cup of trisodium phosphate with 2 gallons of water. Wear gloves and keep the mixture away from your skin and eyes as you use a sponge to apply this diluted cleaning option to the cabinet doors, drawers, and facing. As soon as you have scrubbed the surface areas, utilize your other sponge, to rinse the option off with warm water. The option must quickly eliminate years of oil, mildew, smoke, and other grime that’s masking the beauty of the wood. It ought to also get rid of any continuing to be paint stripper, leaving you with a pristine surface area.
  6. Sand Cabinetry Again. Now that you have stripped, sanded, and cleaned the cabinets, you need to sand all the doors, drawers, and dealing with one more time. This time, make use of 220-grit sandpaper for an ultra-smooth result prior to refinishing the wood.
  7. Vacuum Cabinetry. Make certain that all flecks of dust and grit are gotten rid of from the surface of the wood so your finish doesn’t look bumpy. You do not require a portable vacuum, however you’re going to require a handheld extension for your vacuum cleaner.
  8. Prime Cabinets, if Necessary, and Sand. If you are painting your cabinets rather than staining them, you’ve to think about a coat of primer prior to using the paint. Primer helps paint abide by wood, heal more evenly, and lower the number of coats of paint you need. Use your rollers and brushes to use a coat of primer to all the surface areas you plan to paint. When you are done priming, let it dry for a day prior to painting. Use your 220-grit sandpaper to smooth out any visible brush strokes in the guide after it’s dried, and vacuum again to see to it that all dust is eliminated from the cabinets.
  9. Paint or Stain Cabinets. If you are painting, brush a coat on the front of the doors, drawers, and cabinet box facing. Ensure you brush in line with the wood grain. Allow the doors and drawers to dry on a flat surface area so the paint doesn’t trickle. Flip the doors over when they are dried out and paint the other side. You can secure the dried coat by using your sawhorses, however if you don’t have any simply make certain the surface you make use of is clean. If you are staining, you are going to want to follow the same pattern. Thoroughly brush on a coat of stain with the grain of the wood, but instead of permitting it to dry, make use of a rag to blot off the excess as you go. For both paint and stain, an additional coat is essential if the finish appears blotchy after drying. Wait a minimum of 4 hours before using a final coat.

Additional Steps

Once all the doors, drawers, and cabinet box faces have dried out completely (which usually takes 1 Day), you are ready to move the drawers back into the boxes and screw the doors back onto the hinges. Nevertheless, if you are changing old hardware, you’ve a number of more steps before the task is complete:

  1. Replace Hinges. Replace your old brass hardware with brushed nickel for an upgraded appearance. Select hinges to match the brand-new drawer pulls you have bought then just eliminate the old ones and screw in the brand-new ones.
  2. Create Your Drilling Template. Use the drawer pulls you have chosen to mark the precise place of the holes on your store-bought jig. Then, use the jig to produce a template for all the drilling you should complete on the doors and drawers.
  3. Drill Pilot Holes. When you are installing brand-new hardware, there’s a risk that the cabinet wood might splinter when you drill into it. You can avoid this issue by drilling pilot holes. Use your jig to mark the exact locations of the holes you are going to require and use a small bit in your power drill to create pilot holes. These prepare the wood for screws, and help prevent splintering by leading the screws properly into the wood.
  4. Replace Drawer Pulls. Once you’ve actually drilled pilot holes, utilize them as a guide for the screws that hold the brand-new hardware in place. Use a screwdriver to set up the hardware in the drawers and doors.

If you have not doinged this already, move the drawers back into your cabinet boxes, and re-install the cabinet doors by connecting them to the new hinges.


Final Word

If you love a difficult but simple DIY job, a kitchen cabinet refinishing is right for you. Consider getting a few buddies or family members for extra aid with stripping, sanding, and painting, because all of these actions can show to be lengthy.

If you are feeling energized by all of the money you have saved, consider upgrading other rooms in your house by changing lights, getting rid of popcorn ceiling, or repainting the interior walls. All of these updates can refresh your house and increase its value in the long run.

How’s your house enhanced considering that refinishing your kitchen cabinetry?